Can You Hydro Dip with Acrylic Paint?

Can You Hydro Dip with Acrylic Paint

Hydro dipping is the most popular technique for paint lovers, and it provides an attractive fluid pattern. Choosing the right paint is critical to the hydro dipping method. It makes your hydro dip even better. So, Can you hydro dip with acrylic paint?

Can You Hydro Dip with Acrylic Paint?

You can hydro dip with acrylic paint. Add water and mix cornstarch or borax in a container; then add water to dilute the paint color you want, spread them slowly over the cooling water, swirl them with a toothpick to get the pattern you want; finally, put the wood in the water hydro dip, Wait 20 minutes to dry after taking it out.

3D marbling or paper marbling

Generally, the marbling method has been regarded as the most effective. It can either be 3D marbling or paper marbling. Artists also recommend the hydrographic film method and enamel paint with a borax method. You can also hydro dip based on purpose and requirements.

The marbling method, generally, requires the transfer of ink from the water surface onto a sheet of paper. Let’s go first with the three-dimensional marbling method. Here’s the thing: Apart from the materials, the process of paper marbling is similar to that of the 3D marbling method.

In place of the cornstarch, use borax, ramekins for the container, and a paintbrush for wood. Mix borax and water in a ratio of 3:1. In paper marbling, use ramekins in place of a container.

Primer is great for acrylic paint hydro dip

Step-by-step guide to hydro dip with acrylic paint

What do you need?

For the 3D marbling method, you’ll need:

  • acrylic paint
  • water
  • brush
  • a piece of wood
  • a container
  • cornstarch or borax
  • toothpick
  • pipettes

For the paper marbling, you’ll need to get a piece of paper, a paintbrush, borax, and a tray, plus acrylic paint.

Step-by-step guide to hydro dip with acrylic paint

For both methods, the following steps should be followed:

  1. Heat ¼ cup of water and add 2 teaspoons of cornstarch to it. Stir evenly until the water thickens. Allow the water to cool down.
  2. Select your paint colors, thin them with water before laying them on the thickened and corn-starched cool water. The colors should neither sink into nor show on the surface of the water. Instead, they should float. If they sink, thin them again; if they show, add more paint.
  3. Swirl the paint into desired patterns using a toothpick.
  4. At your desired angle, dip the piece of wood into and out of the water and gently lift the paint
  5. Allow the acrylic paint to dry out of the piece of wood

Benefit of hydro dip with acrylic paint

Knowing how to hydro dip with acrylic paint prevents you from getting exposed to the toxic effect that comes with spray paint. Another advantage is that you won’t need to buy protective gear, whether it’s respiratory masks or gloves. Additionally, hydro dipping can take place both indoors and outdoors. Acrylic water immersion items are simple, safe and provide great results

Other hydro dip methods

Here are more methods that don’t require spray paint: enamel paint with the borax method, nail polish method, hydrographic film method

The average professional is keen on the enamel paint with the borax method, which is often used on guitar bodies and is capable of producing extraordinary swirls.

The nail polish method doubles the effect of a quick-drying, elastic, and glossy water-impregnated paint.

The hydrographic film method is the only method for the most complex and custom prints.

Ideas of hydro dip with paint


You may also wish to learn how to hydro dip with acrylic paint for a specific purpose. It’s pretty simple and fast. All you have to do is to drop the paint into your distilled water and dip the object to see. This process takes 20 minutes or less to be ready.

Leave a Comment

Your email address will not be published. Required fields are marked *